Winbook Camera Drivers For Mac

WebCam Monitor turns your PC into a video surveillance system, that allows you to monitor your home/office from a remote location. Sound an alarm, record audio and video, take photos, broadcast live video, or send email alerts. WINBOOK USB PC CAMERA DC-6120 DRIVER FOR MAC DOWNLOAD - I am very happy with my very fast response. After the next problem comes, I'll be delighted to correspond again with you. WinBook Computer Corporation has merged with Micro Center Online in order to provide you, new and returning WinBook customers, with more selection, service and overall satisfaction. Macam consist of an application and a component. Run the macam application to verify whether your camera works with your Mac and your USB setup. The component is the actual driver that allows other applications to access the video-stream. Tech Tip: The Driver Update Utility for Winbook will back up your current drivers for you. If you encounter any problems while updating your drivers, you can use this feature to restore your previous drivers and configuration settings. Download the Driver Update Utility for.

Advanced Filters

Local Store or Chain Wide Options

Product Results Pagination

1 - 20 of 20 items

Results Navigation

Compare up to 4 items

New list of matching products

X

Sorry, you may compare a maximum of 4 items at a time.

Please clear one or more of your compare items before adding another

• SKU: 677310

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

• SKU: 415653

  • Indoor/Outdoor
  • 0.5 Megapixel Resolution
  • 65 ft. IR Range
  • BNC Connectivity
  • AC Powered

  • Indoor/Outdoor
  • 0.5 Megapixel Resolution
  • 65 ft. IR Range

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

• SKU: 417113

  • Indoor/Outdoor
  • 700 TVL Resolution
  • 65 ft. IR Range
  • BNC Connectivity
  • AC Powered

  • Indoor/Outdoor
  • 700 TVL Resolution
  • 65 ft. IR Range

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

• SKU: 418731

  • Indoor/Outdoor
  • 1.0 Megapixel Resolution
  • 65 ft. IR Range
  • 60째 FOV
  • Ethernet Connectivity
  • PoE Powered

  • Indoor/Outdoor
  • 1.0 Megapixel Resolution
  • 65 ft. IR Range

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

• SKU: 403881

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

  $11.99

• SKU: 403865

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

  $5.99

• SKU: 403949

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

  $8.99

• SKU: 404103

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

  $24.99

• SKU: 404129

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

• SKU: 404111

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

• SKU: 404137

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

  $11.99

• SKU: 404061

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

• SKU: 404095

  Usually ships in 5-7 business days. Limited availability. May not be in stock at time of order. No back orders.

  Usually ships in 5-7 business days....

• SKU: 404038

  Usually ships in 5-7 business days. Limited availability. May not be in stock at time of order. No back orders.

  Usually ships in 5-7 business days....

• SKU: 403907

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

• SKU: 403931

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

  $12.99

• SKU: 403923

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

• SKU: 404012

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

• SKU: 404020

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

• SKU: 897009

  Usually ships in 1-3 business days.

  Usually ships in 1-3 business days.

How to connect an IP camera to your PC or to the computer monitor? If you've got your security video IP cameras home, and you don't plan for an NVR, you may get problems on how to directly connect an IP camera to PC (without routers, without internet, without DVR or without its receiver). This doesn't mean you are an idiot, but you are just not a technical guy or you just don't have experience in this kind of stuff.

It's wise to hook up your security IP cameras to computer (or computer monitor) for 24/7 monitoring and recording. You can, with or without Internet, connect your indoor or outdoor surveillance cameras to PC or to Mac with the top 5 solutions.

Pleased be noted: Install your security cameras in the right positions firstly. You can refer to How to Install Home Security Cameras Successfully.

5 Solutions to Connect Your Security IP CCTV Camera to PC/Mac

And I've covered third party software to connect your IP Camera to computer in the last part.

Those methods will guide you to connect a wireless or PoE IP camera to PC (on Windows 10, Windows 8.1, Windows 8, Windows 7, Windows XP and Windows Vista), and to a Mac (on Mac OS X 10.13, 10.12, 10.11, 10.10, 10.9, etc.).

Important Note: The methods recommended below may NOT apply for the battery powered security cameras, which require initial setup on your phones.

WAIT! Check out these Special Deals before you leave:

Right now, you can get EXCLUSIVE & BIG discounts on a wide range of Reolink security cameras & systems, wire-free & plugged-in, indoors & outdoors.

Here is a simple infographic illustrating the basic steps to connect a security camera (system) to your PC/Mac. You may continue reading for more important notes to help you smoothly set all the things up.

Method 1. Connect a WiFi or PoE Camera Directly to PC/Mac (without Internet)

The steps below detail how to connect your security IP camera directly to PC/Mac, without an NVR or DVR, without a router network, without WiFi, and without any fees or complicated configuration.

Alternatively, you can try the top 2 solutions for cameras without WiFi I have mentioned.

Requirements:

• Your WiFi or PoE camera
• The camera's power adapter
• Your computer (desktop or laptop)
• A network cable

And that's all.

Here is how:

Step 1. Get your security camera charged.

Use the power adapter to get the camera plugged-in and charged. Normally, when you buy a WiFi IP camera, it comes with a power adapter. For a PoE camera, ask the supplier and buy one that's workable for the camera.

Step 2. Use the network cable to connect to the camera and the computer.

Normally there would be a 2-in-1 or 3-in-1 cable attached from the camera. Find the network connector from that cable and use the network cable to connect to it. Then connect the other end of the network cable to the computer.

If your computer has network already, disable it – make sure your computer is offline.

Step 3. Scan and find out the security camera's IP address on the computer.

Now the security camera is connecting to your computer basically and physically. But you still can't view the camera on the computer.

What you need to do now is to scan and find out the camera's IP address. There should be surveillance software from the same supplier with the camera.

Take our test as an example. We have Reolink Client on the computer. Launch it and it will automatically scan all the cameras in the same local LAN and show the default IP address (every camera has a default and unique IP address when it leaves the factory). Easy peasy!

Step 4. Change the computer's IP address to the same network prefix of the IP camera.

So in Step 3, you get your security camera's default IP address. In our test, the default IP address of the camera we use is 192.168.177.100, and now you need to change your computer's IP address to 192.168.177.x, where x identifies the node/host and is the number between 2 and 254. So let's say the computer's IP address is 192.168.177.12.

IP address 101: An IP address consists of two parts – one belongs to the network address and one belongs to the node address. All nodes on a given network share the same network prefix but have a unique host number.

Now to change the computer's IP address (we take Windows 10 as an example):

1) Press the Windows + R keyboard shortcut to bring out the Run box.

2) Enter ”ncpa.cpl” and open the ”Network Connections” window.

3) Right-click your computer’ network adapter and select ”Properties”.

4) Select your computer's Internet Protocol Version and click ”Properties”.

Jvc Digital Video Camera Drivers For Mac

5) Select ”Use the following IP address” and change the IP address into 192.168.177.12.

And done. Now your IP camera is connecting directly and communicating with your PC, because they are now in the same little LAN. You can watch your IP camera with Reolink Client on your computer.

Here's the video footage shared by one of our customers (captured by Reolink RLC-410).

Important: Since there is no router network, the IP camera would not transmit data or send alarms to your phone. Still, you can record and save all the footage onto your computer.

If you're gonna use your IP camera with the computer all the time like this (without router network), you'd better change the default status of your IP camera's IP address to the static to keep it the same all the time, because each time you reboot the IP camera, its IP address will be changed and you will need to do all the steps above again. To keep the IP camera's IP address the same all the time, head to ”Device Settings” and ”Network General” on the Client (Reolink Client in our test), and choose ”Static” for ”Network Access”. And done.

Method 2. Connect a Wireless/WiFi Camera to Computer via Router (with Internet)

If you do have WiFi network and need to remotely see the IP camera when you're not there, you can connect your wireless or WiFi camera to computer wirelessly via your router.

Requirements:

• Your WiFi camera
• The camera's power adapter
• Your computer (desktop or laptop)
• A network cable
• A router

Here is how:

Step 1. Get your WiFi security camera charged.

Use the power adapter to get the camera plugged-in and charged.

Step 2. Use the network cable to connect to the camera and the router.

A WiF camera needs to connect to the router with a network cable for initial setup, because the new camera itself wouldn't recognize and auto-pick up a network that it never uses. Only after the correct WiFi settings can you disconnect the cable from the camera and the router.

And yeah again, normally there would be a 2-in-1 or 3-in-1 cable attached from the WiFi camera. Find the network connector from that cable and use the network cable to connect to it. Then connect the other end of the network cable to the router.

Step 3. Watch the IP camera on PC/Mac

On the computer, launch the surveillance software to add the camera and watch live view directly.

In our test, we open Reolink Client. Since the computer and the camera are in the same network (using the same router network), Reolink Client automatically searches and displays the camera directly. Click ”Start” and you can view the camera on PC. And you can set up the configurations for all the functions you want the camera to have.

Here's the video footage shared by one of our customers.

Reolink C1 Pro

Smart Home Dual-Band WiFi PT Security Camera

1440p Super HD; Pan & Tilt; 2-Way Audio; Excellent Night Vision; Smartphone Remote Access; See What’s Happening in Your House.

Step 4. Set up WiFi settings and remove the network cable.

Do remember to make the WiFi settings for the camera. On the software, navigate to ”Device Settings” and ”Network”. Choose the WiFi network and enter the password, and done. Cameras from different brand would have different WiFi settings. Please refer to the guides you get from your supplier.

After that, remove the network cable, and then the security IP CCTV camera connects to computer wirelessly.

Important: If you need to see the IP camera from another computer which is not in the same network, you need to input the camera's UID into the software to remotely access the camera.

Method 3. Connect a PoE (Wired) IP Camera to Computer without PoE Injector/Switch

Connecting a PoE wired IP camera to computer via router is similar to that of a WiFi camera, and even much easier – you don't need to use a power adapter, set up the WiFi and remove the network cable.

Requirements:

• Your PoE camera
• Your computer (desktop or laptop)
• A network cable
• A router with PoE feature

Here is how:

Step 1. Use the network cable to connect to the camera and the router.

PoE (Power over Ethernet) means you can just use a single network cable for both video and power transmission. So just connect the camera to the router via the network cable, and the camera will get power supply and network access.

Please make sure your router has the PoE feature. If not, try the next method.

Step 2. Watch the IP camera on computer.

On the computer, launch the surveillance software to add the camera and watch live view directly.

In our test, we open Reolink Client. Since the computer and the camera are in the same network, Reolink Client automatically searches and displays the camera directly. Click ”Start” and you can view the camera on PC. And you can set up the configurations for all the functions you want the camera to have.

Here's the video footage shared by one of our customers.

Reolink RLC-410

PoE Bullet IP Security Camera with Audio

5MP/4MP Super HD; Outdoor/Indoor Protection; 100ft Infrared Night Vision; Audio Recording; Mobile Remote Access & Control.

Important: If you need to see the IP camera from another computer which is not in the same network, you need to input the camera's UID into the software to remotely access the camera.

Method 4. Connect a PoE (Wired) IP Camera to Computer with PoE Injector/Switch

If your router does not support PoE, you need a PoE injector or PoE switch to help connect your IP camera to PC.

Requirements:

• Your PoE camera
• The camera's power adapter
• Your computer (desktop or laptop)
• A network cable
• A router
• A PoE injector or PoE switch

Here is how:

Since the steps on how to connect a PoE IP camera to PC via PoE Injector/switch are quite the same to that of connecting without a PoE Injector/switch, we'd like to make it more simpler to understand here.

Connect all the devices as the picture showed below:

Important: Once you connect the PoE IP camera to the PoE injector or switch which is connected to a router via Ethernet cables, you've successfully connect the camera to the network. For a wireless IP camera, you need to use a network cable to connect it to the router if you haven't set up the WiFi network configuration. And then the wireless IP camera is in the network. You can set up the WiFi configuration later to make the wireless IP camera connect wirelessly.

Make sure your wireless IP camera is connected to a power supply.

Then on Reolink Client, add the camera and watch live view directly.

If you need to see the IP camera from another computer which is not in the same network, you need to input the camera's UID into the software to remotely access the camera.

Method 5. Connect a CCTV Camera System to PC/Mac (with or without Network)

Reolink security camera systems, like the PoE kit RLK8-410B4, have their own proprietary networks, and can work with and without your router network.

Here's how:

How to connect a CCTV security camera system to computer without router network

Step 1. Connect all the cameras to the NVR.

When you receive the new IP camera system you bought, connect all the devices you got – connect the NVR to your computer's monitor and the mouse, use the power adapters to charge the NVR and cameras, etc. For a WiFi system, once the WiFi NVR and the WiFi cameras are charged, they connected to each other automatically and would start communicate. For a PoE system, connect the PoE cameras to the NVR via the network cables provided.

Step 2. Start watching the IP cameras.

The startup and setup wizard will pop up to guide you to watch your cameras and do other configurations.

Now you can see all the IP cameras on your monitor and start recording.

Here's the video footage shared by one of our customers.

How to connect a CCTV security camera system to computer with router network

Step 1. Do the step 1 showed above.

Step 2. Connect the NVR to your router via the network cable provided.

Step 3. Start watching the IP cameras.

The startup and setup wizard will pop up to guide you to watch your cameras and do other configurations.

Winbook Sound Driver

If you need to see the IP cameras from another computer which is not in the same network, you need to input the NVR's UID into the software to remotely access the cameras.

Third Party Software to Connect IP Camera to PC/Mac

You can also opt for third-party software to connect and set up security camera on computer. Make sure the software can handle all the cameras on the network and support all the features for the cameras. Normally, the third-party software has several versions. And if you want to use full features of the camera, you need to pay for a premium version.

If your security IP camera is not working properly as expected or if you get any issues, you can try the top 10 solutions to fix IP camera not working.

For any questions, please don't hesitate to leave it in your comment. I will reply as soon as possible.